Interactive quadrangulation with Reeb atlases and connectivity textures

Creating high-quality quad meshes from triangulated surfaces is a highly nontrivial task that necessitates consideration of various application specific metrics of quality. In our work, we follow the premise that automatic reconstruction techniques may not generate outputs meeting all the subjective quality expectations of the user. Instead, we put the user at the center of the process by providing a flexible, interactive approach to quadrangulation design. By combining scalar field topology and combinatorial connectivity techniques, we present a new framework, following a coarse to fine design philosophy, which allows for explicit control of the subjective quality criteria on the output quad mesh, at interactive rates. Our quadrangulation framework uses the new notion of Reeb atlas editing, to define with a small amount of interactions a coarse quadrangulation of the model, capturing the main features of the shape, with user prescribed extraordinary vertices and alignment. Fine grain tuning is easily achieved with the notion of connectivity texturing, which allows for additional extraordinary vertices specification and explicit feature alignment, to capture the high-frequency geometries. Experiments demonstrate the interactivity and flexibility of our approach, as well as its ability to generate quad meshes of arbitrary resolution with high-quality statistics, while meeting the user’s own subjective requirements.     

A fuzzy queue-aware routing approach for wireless mesh networks

Recent advances in Wireless Mesh Networks (WMNs) have overcome the drawbacks of traditional wired and ad-hoc networks and now they are seen as a means of allowing last mile communications with quality level assurance in Future Multimedia Systems. However, new routing schemes are needed to provide end-to-end Quality of Service (QoS) and Quality of Experience (QoE) support for delay/loss/jitter-sensitive multimedia applications. The well-known OLSR (Optimized Link State Routing) protocol with ETX (Expected Transmission Count) metric brings many benefits to the path selection process, but has a drawback with regard to queue availability management, which reduces the system performance. This problem is caused when OLSR-EXT control messages are exchanged and the queues of mesh routers along the end-to-end communication path are overloaded. As a result, multimedia-related packets will suffer from loss/delay/jitter and the overall system performance will decrease. This paper proposes the Optimized Link State Routing-Fuzzy ETX Queue (OLSR-FEQ) protocol to overcome the limitations of OLSR-ETX regarding queue availability, QoS and QoE assurance. OLSR-FEQ optimizes network and user-based parameters by coordinating queue availability, QoS and fuzzy issues in the routing decision process as a way of allocating the best paths for multimedia applications. Performance evaluations were carried out with the Network Simulator (NS-2.34) to show the benefits of the proposed solution when compared with existing routing schemes, namely OLSR-ETX, OLSR-FLC, OLSR-MD and HWMP (IEEE 802.11s standard), regarding QoS (unsuccessful packet delivery and throughput) and QoE (PSNR, SSIM, VQM and MOS) parameters.     

Modeling of the condyle elements within a biomechanical knee model

The development of a computational multibody knee model able to capture some of the fundamental properties of the human knee articulation is presented. This desideratum is reached by including the kinetics of the real knee articulation. The research question is whether an accurate modeling of the condyle contact in the knee will lead to reproduction of the complex combination of flexion/extension, abduction/adduction, and tibial rotation observed in the real knee. The model is composed by two anatomic segments, the tibia and the femur, whose characteristics are functions of the geometric and anatomic properties of the real bones. The biomechanical model characterization is developed under the framework of multibody systems methodologies using Cartesian coordinates. The type of approach used in the proposed knee model is the joint surface contact conditions between ellipsoids, representing the two femoral condyles, and points, representing the tibial plateau and the menisci. These elements are closely fitted to the actual knee geometry. This task is undertaken by considering a parameter optimization process to replicate experimental data published in the literature, namely that by Lafortune and his coworkers in 1992. Then kinematic data in the form of flexion/extension patterns are imposed on the model corresponding to the stance phase of the human gait. From the results obtained, by performing several computational simulations, it can be observed that the knee model approximates the average secondary motion patterns observed in the literature. Because the literature reports considerable inter-individual differences in the secondary motion patterns, the knee model presented here is also used to check whether it is possible to reproduce the observed differences with reasonable variations of bone shape parameters. This task is accomplished by a parameter study, in which the main variables that define the geometry of condyles are taken into account. It was observed that the data reveal a difference in secondary kinematics of the knee in flexion versus extension. The likely explanation for this fact is the elastic component of the secondary motions created by the combination of joint forces and soft tissue deformations. The proposed knee model is, therefore, used to investigate whether this observed behavior can be explained by reasonable elastic deformations of the points representing the menisci in the model.     

Automatic stress exaggeration by prosody modification to assist language learners perceive sentence stress

In this paper, we propose a set of automatic stress exaggeration methods that can enlarge the differences between stressed and unstressed syllables. Our stress exaggeration methods can be used in computer-aided language learning systems to assist second language learners perceive stress patterns. The intention of our automatic stress exaggeration methods is to support hyper-pronunciation training which is commonly used in classrooms by teachers. In hyper-pronunciation training, exaggeration is used to help learners increase their awareness of acoustic features and effectively apply these features into their pronunciation. Duration, pitch and intensity have been claimed to be the main acoustic features that are closely related to stress in English language. Thus, four stress exaggeration methods are proposed in this paper: (i) duration-based stress exaggeration, (ii) pitch-based stress exaggeration, (iii) intensity-based stress exaggeration, and (iv) a combined stress exaggeration method that integrates the duration-based, pitch-based and intensity-based exaggeration methods. Our perceptual experimental results show that resynthesised stimuli by our proposed stress exaggerated methods can help learners of English as a Second Language (ESL) better perceive English stress patterns significantly.     

Evaluating the influence of multiplexing schemes and buffer implementation on perceived VoIP conversation quality

This work presents a study of RTP multiplexing schemes, which are compared with the normal use of RTP, in terms of experienced quality. Bandwidth saving, latency and packet loss for different options are studied, and some tests of Voice over IP (VoIP) traffic are carried out in order to compare the quality obtained using different implementations of the router buffer. Voice quality is calculated using ITU R-factor, which is a widely accepted quality estimator. The tests show the bandwidth savings of multiplexing, and also the importance of packet size for certain buffers, as latency and packet loss may be affected. The customer’s experience improvement is measured, showing that the use of multiplexing can be interesting in some scenarios, like an enterprise with different offices connected via the Internet. The system is also tested using different numbers of samples per packet, and the distribution of the flows into different tunnels is found to be an important factor in order to achieve an optimal perceived quality for each kind of buffer. Grouping all the flows into a single tunnel will not always be the best solution, as the increase of the number of flows does not improve bandwidth efficiency indefinitely. If the buffer penalizes big packets, it will be better to group the flows into a number of tunnels. The router processing capacity has to be taken into account too, as the limit of packets per second it can manage must not be exceeded. The obtained results show that multiplexing is a good way to improve customer’s experience of VoIP in scenarios where many RTP flows share the same path.     

Propagation of transverse bulk and surface acoustic waves in LiNbO (3) variable time-delay devices

Experimental measurements are reported on voltage-controlled acoustic time-delay lines operating at 1 GHz in the nearly pure shear-horizontal (S-H) mode in 38 degrees rotated Y-cut LiNbO(3). The high-acoustic velocity (4800 m/s) in conjunction with the large electroacoustic effect exhibited by this orientation allows high-frequency operation and optimum time-delay tuning sensitivity with a planar, single surface, device geometry. The authors demonstrate fractional time delay of 0.3x10(-6) V(-1 ) for surface electrodes that produce an in-plane E-field. However, the simultaneous excitation and propagation of both a leaky surface-acoustic wave (LSAW) and surface skimming bulk wave (SSBW), both as (nearly pure) S-H waves in these devices, seriously restricts the extent to which it is possible to maximize the time delay modulation sensitivity by reducing electrode gap spacing as done in similar SAW devices. The LSAW and surface-skimming body wave (SSBW) propagate at nearly the same velocity on a free surface, and perturbation of their velocity and relative attenuation rates by surface electrodes causes pronounced interference effects between the two modes for some device geometries.     

Flavonoids of “La Alcarria” honey A study of their botanical origin

Summary The flavonoids present in ten selected samples of La Alcarria honey with different pollen compositions have been HPLC analysed in order to establish if correlations between botanical origin and flavonoid profiles are possible. A common flavonoid pattern is observed in the different samples showing that pollen is not the main source of honey flavonoids. A close correlation between the flavonoid patterns of honey flavonoids and propolis flavonoids has been found suggesting that flavonoid analysis could be more useful in geographical origin determinations than in botanical origin studies.

---

Flavonoide des La-Alcarria-Honigs Eine Studie ihres botanischen Ursprungs

Zusammenfassung Die Flavonoide in Proben in Alcarria-Honig mit unterschiedlicher Pollenzusammensetzung wurden untersucht, um Kortrelationen zwischen dem botanischen Ursprung und den möglichen Flavonoiden zu finden. In den verschiedenen Proben wurde ein Flavonoid-Muster gefunden, wobei der Pollen nicht die Hauptquelle der Honigflavonoide ist. Es wurde jedoch eine enge Korrelation zwischen den Flavonoid-Mustern des Honigs und des Bienenkittharzes gefunden, was für die geographische Herkunft wichtiger ist als die botanische.

     

A random dipole model for spontaneous brain activity

The statistical properties of the EEG and the MEG are described mathematically as the result of randomly distributed dipoles. These dipoles represent the interactions of cortical neurons. For certain dipole distributions, the first- and second-order moments of the electric and magnetic fields are derived analytically. If the dipoles are in a spherical volume conductor and have no preference for any direction, the variance of a differentially measured EEG-signal is only a function of the electrode distance. In this paper, the theoretically derived variance function will be compared with EEG- and MEG-measurements. It is shown that a dipole with a fixed position and a randomly fluctuating amplitude is an adequate model for the alpha-rhythm. An expression for the covariance between the magnetic field and a differentially measured EEG-signal is derived. This covariance is considered as a function of the magnetometer position, and is compared with the measurements of Chapman et al. [23]. The theory can be used to obtain a (spatial) covariance matrix of the background noise, which occurs in evoked potential measurements. Such a covariance matrix can be used to obtain a maximum likelihood estimator of the dipole parameters in evoked potential studies, to evaluate the merits of the so-called "Laplacian derivation," and for the interpolation of electromagnetic data.     

Acoustic microscopy and nonlinear effects in pressurized superfluid helium

The operation of an acoustic microscope having a resolution of 15 mm has been demonstrated. It uses as a coupling medium superfluid (4 )He colder than 0.9 K and pressurized to greater than 20 bar. The microscope has been used to image objects that show little or no contrast on a scanning electron microscope. In addition, the acoustic microscope has been used to study the properties of sound propagation in the coupling fluid. At low acoustic intensities, the coupling fluid has very low acoustic attenuation at the microscope's operating frequency (15.3 GHz), but near the focal point the acoustic intensity can be high enough that the helium behaves with extreme nonlinearity. In fact, this medium is capable of entering new regimes of nonlinear interaction. Plots of the received signal versus input power display a nearly complete source depletion at certain input power levels and a reconversion to the source frequency at higher power levels. Arguments that the process underlying this nonlinear behavior is harmonic generation are presented.     

Structure and catalytic activity of highly ordered AlMCM-48 materials with different Si/Al ratios on the degradation of high-density polyethylene

Journal of Porous Materials - Catalysts of AlMCM-48 with different Si/Al molar rations were synthesized by modified hydrothermal method with respect to previous works. As a consequence, the...